-50%
In Stock
IN STOCK
Available
MVR 180.00  −50%
MVR 90.00
Incl. GST
Scroll to see available shops

Microduino ZigBee

Brand
Microduino
Code
MOMDBL31
Age
9yr+
Pack Size
127 x 25 x 183 mm
Stock
Only 2 in stock for delivery
Delivery
      Checking Delivery
MVR 180.00  −50%
MVR 90.00
Incl. GST

The Microduino ZigBee add-on brings energy-efficient wireless communication to your Microduino builds. At its heart sits the TI CC2530 chip, a 2.4 GHz IEEE 802.15.4 solution that combines an RF front end with an enhanced 8051 microcontroller, 256 KB of in-system programmable flash and 8 KB of RAM. With up to 4.5 dBm of transmit strength, it comfortably covers distances of around 100 meters in open areas, letting two or more projects exchange data without a single cable.

The module passes serial data straight through: whatever your controller sends over its UART goes out over the air and reappears as TTL serial on the receiving side, which makes linking nodes refreshingly simple. Multiple operating and sleep modes keep the current draw down to micro-amps when idle, so the unit suits both portable and always-on applications. A reserved CCDEBUG header also leaves room for deeper firmware work.

Visually, it is a neat square of white PCB, about 1 x 1 inch, edged with a ring of black female sockets whose gold-plated contacts snap firmly onto a Microduino Core or any other module in the family. The U-shape 27-pin interface follows the standard Microduino layout, and the 2.54 mm (0.1 inch) pin pitch lets you wire it into a breadboard or perfboard as well. The silkscreen shows the Microduino name and logo, the ZigBee label and an Arduino-compatible badge, matching the product photo.

  • TI CC2530 chip with enhanced 8051 CPU, 256 KB flash and 8 KB RAM
  • 2.4 GHz IEEE 802.15.4 air interface with up to 4.5 dBm transmit strength
  • Transparent UART pass-through for simple point-to-point links
  • Wide 2 V to 3.6 V supply range with micro-amp sleep currents
  • CCDEBUG header reserved for advanced firmware development
  • U-shape 27-pin Microduino interface with a 2.54 mm pin pitch
  • Open-source hardware design with freely shared schematics

Note: a Microduino Core or another compatible controller is required to use this add-on, and a Microduino USBTTL adapter makes uploading and configuration easy.

   Loading related products...
   Loading reviews...